Elevate your outdoor projects with top-tier equipment today! Flat Rate Shipping Applies to U.S (lower 48 states) and Canada.

Enjoy hassle-free delivery at a flat rate of $250 to the U.S. and Canada. Click here to review our Shipping Policy.

0

No products in the cart.

0

No products in the cart.

WoodMaxx RT-80

80" PTO Rotary Tiller

$2,649.00

-

Clear

Back in stock February 2024. Orders placed today will ship within 1 week.

Featured Add-Ons

Accessories

RT-Series Tine (Left)

$13.15

RT-Series Tine (Right)

$13.15

Out of stock

Oil

Synthetic Severe Gear 75W-90 Synthetic Gear Lube ( 1 qt.)

$17.00

PRODUCT DETAILS

WEIGHT

781 lbs. Tractor Rotary Tillers need to be heavy in order for the tines to penetrate the ground, and reduce bucking.

WORKING WIDTH

73″

OVERALL WIDTH

80″

OFFSET

10″ to the right of center. The tiller is offset from the center of the PTO so that you don’t end up with compacted tire tracks in you finished bed.

ROTATION

Forward, same rotation as the tires of the tractor when traveling forward. This rotation requires less HP to operate; allows for a smoother bed of soil behind the tiller, and allows rocks to expel without recycling them through the tiller.

HP REQUIRED

30-55 HP

WORKING DEPTH

Adjustable side runners to 8″ deep. Adjustable and replaceable side runners allow for deep tilling.

NUMBER OF FLANGES

8 this is the total number of disc on the rotor that support the tines. These disc are precisely spaced to maximize tilling coverage while at the same time reduce jamming caused by rocks and debris.

TINES PER FLANGE

The 6 inner flanges use 6 tines. The 2 out flanges use 3 inward facing tines. This configuration reduces the impacting of dirt between the outside flanges and the side plate ultimately wearing on the bearing seals, at the same time redirecting the soil to the inside of the tiller instead of spilling it out the sides of the tiller. WoodMaxx exclusive design.

TOTAL # OF TINES

42 tines are precisely spaced to maximize down pressure on each tine as the rotor turns. They are also spaced to allow rocks and large debris to be easily expelled.

BLADE TYPE

The Blade types of this PTO Tiller are Self-sharpening C-shaped. C compared to L- shaped, the C- shape is more efficient, and requires less HP to dig into the soil. The gradual c-shape is stronger than the sharp bend of the L-shaped blades.

BLADE (TINES) MATERIAL

.25″ 60SI2MN, spring steel, (American standard: A29M) formed, heat treated, and quenched in oil. These blades are self-sharpening and made to last.

ROTOR DIAMETER

3″ diameter 5/16″ wall tube. Large tube diameter adds strength and rigidity.

ROTOR SWING DIAMETER

19-1/2″ diameter. Large swing diameter allows for deep digging.

ROTOR SHAFT SPEED

540 RPM PTO input speed = 210 RPM rotor shaft speed. The rotor speed is matched with the number of tines to reach the ideal torque required to tear through the earth.

DECK MATERIAL

Shaped and formed 5/32″, .16″, 8 – gauge. Heavy formed Q-235 (American standard ASTM a-36) structural steel plate. Forming allows for additional strength and rigidity.

SIDE PLATE MATERIAL

5/16″, .32″. Heavy Q-235(American standard ASTM A-36) structural steel plate; think steel to ensure structural integrity of the unit during heavy use.

REAR DEFLECTOR

Keeps dirt in and maintains a level finish. The deflector is shaped and formed for additional strength. Adjustable deflector level allows for various finish results.

MAIN GEARBOX

ASAE 1- 3/8″ – 6 spline shaft, proven cast iron, oil bath gearbox; ratio is 1.69:1.

GEAR DRIVE

Oil bath gear driven side gear drive mechanism; gear ratio is 1.52:1 gear drive is superior to chain drive in every way.

HITCH TYPE

Standard 3-point hitch. Or category 1 quick hitch 14a, clevis type lower hitch make attaching to your tractor a breeze.

PTO SHAFT

T5 driveline with slip clutch torque limiter. Competitors don’t use the heavy T5 type that we do. The slip clutch is a must when tilling. The slip clutch will slip a little during heavy tilling or when contacting an unmovable object.

PARKING STAND

Supports the tiller during storage to prevent it from tipping.

FINISH

Baked-on powder coat, powder coat is superior to paint.

WARRANTY

2 year parts warranty.

PART/SERVICE

At WoodMaxx our service department is staffed with professional certified technicians that inspect each machine before it is shipped. This ensures that you get a trouble free machine from the get go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse.

California Residents See Prop 65 WARNINGS



In Stock Notification Please fill out the requested information below with your email and cell phone number (NO dashes). We will email and text you when this product is back in stock. This serves as an "In Stock" alert only and not a guarantee of a purchase. You will remain on the notification list for 60 days - after 60 days you will need to add your name back on the list.